Tools For the Handyman

Handyman Naperville IL works in residential or commercial settings to perform repairs and maintenance. This includes painting, flooring, furniture assembly, and other tasks.

Local hardware stores often serve as a referral source for high-quality Handymen. Some states require handypersons to be licensed or insured. Some specialize in a particular area of work, while others can handle multiple areas.

A handyman needs various tools to complete multiple tasks, but one of the most important is fish tape. This tool allows a handyperson to run wires or cables through walls and tight spaces. This is a common task when installing lighting, doorbells and other electrical fixtures. There are different types of fish tape available, but the best choice depends on the job and the user’s experience level. Steel fish tapes are strong and work well for long, straight runs, while fiberglass fish tapes are flexible and can navigate tight bends or insulated walls.

Another type of fish tape is magnetic, which uses a magnet to guide the wire or cable through walls. This is a useful tool for electricians because it can help them avoid damaging existing wiring or pushing through walls too fast. Another option is a power fish tape, which can feed and retract lines two to three times faster than manual models.

The best fish tape for a particular project depends on several factors, including length, flexibility and durability. It’s also important to consider whether you’re running a wire through new construction or an existing home. If you’re working in an older building, nonconductive fish tapes may be necessary to avoid shocking existing conductors.

A quality fish tape should have clear, accurate measurement markings, be durable and easy to handle. Many newer models feature an ergonomic design with overmolded hand grips and high-durability plastics to reduce fatigue. They also have rapid payout and rewind mechanisms to speed up movement of the tape.

When using a fish tape, it’s a good idea to plan out how far you’ll be pulling the tape before starting. This will ensure that you don’t run out of tape before reaching your destination. You can also use a piece of electrical tape to mark the spot where you’ll need to stop.

It’s also helpful to make sure the end of your fish tape is properly secured. The sharp edge can be dangerous to your eyes, so take the time to bend it over with pliers and crimp it down tightly. This will prevent the tape from becoming tangled up in existing wiring or becoming lost while you’re working. You can also use a wire-pulling lubricant to reduce friction and make the process easier.

Electrical Tape

Electrical tape is a specialized type of self-adhesive tape that’s designed to insulate wires and materials that conduct electricity. It typically has a PVC backing and a non-corrosive rubber-based adhesive that can provide a long-term hold on wires and other materials. The backing is also designed to be stretchy so that the tape can conform to wires and other types of materials. Electrical tapes come in a wide range of colors and features that help them to meet different needs for specific applications. Backing construction, thickness, and dielectric strength are a few of the features that help to differentiate one type of electrical tape from another.

It’s important for handymen to choose the right electrical tape for their projects. Regular general-purpose tape may melt or ignite when it comes in contact with electricity, so specialized electrical tape is needed for safe and effective wiring applications. When selecting electrical tape, handymen should always check for UL (Underwriters Laboratories) approval. This helps to ensure that the tape meets national safety standards and will be durable for a long time.

In addition to checking for UL approval, it’s important for handymen to select the correct electrical tape for their job. They should consider factors like temperature ratings and if the tape is able to withstand exposure to moisture or harsh environments. They should also check for tensile strength and if it has good adhesion to itself and the material that it’s being used on.

Finally, handymen should always make sure that their area is free of electricity before applying electrical tape. Many accidents happen when people try to bind wires while the power is still running. By turning off the power at the circuit breaker box and double-checking the voltage status with a tester, handymen can ensure their safety while working with electricity. Duct tape should never be used to bind wires, as it lacks the necessary flexibility and insulating properties that electrical tape has.

Circular Saw

A circular saw can be a handyman’s best friend for woodworking projects, as it allows you to make smooth, accurate cuts in a wide range of materials. It’s especially useful for larger jobs where you may need to cut lumber for a frame or deck, as well as cutting plywood sheets to size.

When using a circular saw, it’s important to take precautions and follow best practices to ensure your safety and prevent injury. Using proper technique will also help you achieve more precise cuts and better results.

Start by ensuring the saw is properly set up. Place the workpiece on a stable surface and secure it with clamps or sawhorses to prevent movement during the cut. Position the saw on the material and align it with the mark or template you are following to guide the blade. Apply gentle pressure on the saw and guide it through the workpiece, avoiding quick movements or excessive force.

Once the saw is in position, activate the power switch or trigger to turn on the blade. Hold the large handle with your dominant hand and use your other hand to control the trigger. If the saw comes with a second handle, place it in your non-dominant hand to control the blade while you’re cutting. A safety or trigger lock switch is typically located on the handle and will prevent the blade from turning on if the trigger is not being squeezed.

Circular saws can be used to make a variety of cuts, but they’re most effective for straight rip and bevel cuts. When making these types of cuts, it’s important to adjust the blade depth so that it reaches just above the bottom of your material. You can also adjust the angle of your cut by loosening the bevel adjustment lever or knob and tilting the base plate in a desired direction.

To keep your circular saw in good condition, it’s recommended to clean the saw regularly. This will remove dirt, debris, and sawdust from the blade, blade guard, motor, and other moving parts. It’s also important to lubricate the depth adjustment mechanism periodically to maintain smooth operation.


A drill is an electrical power tool used for boring holes in wood, metal, stone, teeth, and other materials. It consists of a body with a motor, a chuck on the front that holds the drill bit and a trigger on the back to start and stop the motor. The drill can also have a handle to hold it by hand, which is useful for smaller projects.

The occasional handyman may use a drill to do basic repairs around the house, but it’s also useful for larger projects like installing a deck or an entertainment center. A good quality drill should be able to bore through concrete, steel, and other hard materials. It should also have variable speed and torque settings. For large projects, a corded or cordless drill with multiple attachments is recommended.

A power drill is an inexpensive and useful tool for a DIYer, but it’s not suitable for all types of tasks. Some jobs require a high amount of force, such as driving screws into dense materials. To do these jobs, a heavy-duty drill is necessary. These tools typically have more torque and a higher power output than smaller drills.

Drill rap is a lyrical subgenre of hip hop that is popular among youths in the United States. It is often associated with street culture and gangs, and it features lyrics that reference drugs, guns, and violence. As a result, the music has been criticized for fueling violence in London and other parts of the world. In 2018, a police commissioner blamed the genre for a rise in knife and gun crimes among young people, and she asked YouTube to remove videos that glamorize violence.

Despite its critics, drill rap is popular with many young people. It has influenced the musical styles of other genres, including trap and gangsta rap. It has also helped popularize rappers like Chief Keef, who rose to prominence after appearing on Kanye West’s “Yeezus” album in 2014. It has become a part of mainstream music, and many artists have adopted its sound and style.

Mold Removal: What Is Mold Remediation?

A few splotches of surface mold on a tub or bathroom wall don’t necessarily indicate a serious problem and shouldn’t require professional intervention.

A good mold remediation company like Mold Removal In Brooklyn will be knowledgeable about the process, explain it clearly to homeowners, and work safely. They’ll use fans and dehumidifiers to control moisture.

Mold remediation is the process of removing, cleaning, and disinfecting areas affected by mold growth. It also includes addressing the conditions that allowed mold to grow in the first place. For example, a leaky pipe that was left untreated may have caused the mold, and repairing this problem can help prevent future problems with mold. The cost of a mold remediation project depends on several factors, including the type of mold. Black mold (Stachybotrys chartarum) is more toxic and more expensive to remove than other types of mold, such as white mold (Aspergillus niger). In addition, the extent of the water damage that was caused by the mold can affect the overall cost of the project.

During the initial assessment phase, a mold removal specialist will come to your home or business and determine the extent of the problem. They will look at everything from the visible mold to the potential for hidden infestations in crawl spaces, behind walls and inside panels. They will also take into account the level of humidity and organic material present, as these can encourage mold growth.

Once the inspection is complete, the restoration company will begin their work. They will usually start by removing any saveable contents from the infested area. This may include textiles, clothes, hard goods, electronics and more. They will then pack these items up and take them away to be cleaned and restored.

Moisture is often the key to mold growth. Removing the mold isn’t enough to stop it from coming back if the moisture problem remains. A professional will usually apply a chemical called a biocide to the entire area, which kills any spores and helps prevent future growth.

After the area has been treated, the restoration company will set out dehumidifiers and fans to dry the space. Once the space is completely dry, they will repaint the surface with a regular latex paint that contains mildewcide to prevent mold from growing again.

Mold exposure can be dangerous for people with preexisting respiratory conditions such as allergies, multiple chemical sensitivity and asthma. It can also be a serious health concern for infants and the elderly. In some cases, exposure to mold can lead to sinusitis and even a condition known as hypersensitivity pneumonitis.


Mold spores can be airborne, and they can cause a wide variety of symptoms, from nose and throat irritation to headaches and sore eyes. They can also trigger asthma and respiratory distress in those with sensitive lungs. For that reason, it is vital to protect yourself during mold removal. Wear a high-efficiency particulate respirator (N95 or P100) in addition to goggles and rubber gloves. If possible, set an old box fan in a window to ventilate the area as you work. Tape plywood around the windows to keep spores from blowing back in, and double-bag dirty materials for garbage disposal to control spore migration.

Molds grow on organic material, and they thrive in moist environments. Attempting to clean up mold without eliminating the source of moisture is futile, and it can be dangerous.

Before you begin cleaning, it’s important to assess the severity of the infestation. If it’s a small patch of black mold or another color, you may be able to tackle the problem with basic soap and water, although you should always wear protective gear. If you have a serious mold problem, call a professional.

Trying to remove mold in an uncontained environment can release spores, which can cross-contaminate clean areas and make you sick. Mold spores can be carried on clothing, in shoes and on animals’ fur, and they can even find their way into other homes.

In addition to removing the visible mold, you should scrub and disinfect surfaces in affected areas. It is important to use an EPA-approved biocide, or antimicrobial, to kill the spores and prevent them from growing again. You should also wash and dry all surfaces that came into contact with the mold, including nonporous items such as bathtubs, counters and metals.

Porous items such as drywall, carpeting and ceiling tiles may have to be thrown away. Molds can slip deep into the fibers, making them impossible to remove completely.

You can reduce the amount of mold spores that enter your home by controlling humidity, keeping plants outside, and removing leaves and debris from outdoor gardens. It is also a good idea to wear gloves when working outdoors, and if you must work with mulch, dispose of it regularly. Keeping your garage organized with heavy-duty bins can also help to contain any damp material that could lead to mold growth.


If a mold growth problem is addressed quickly, it can be cleaned up before it spreads. This process of removing and cleaning the affected materials is called mold remediation. This also includes fixing the issues that caused the problem in the first place, such as repairing leaks and lowering humidity levels.

Infection by mold spores may cause health problems, especially in sensitive individuals or those with chronic respiratory conditions. Prolonged exposure to mold spores can lead to asthma or bronchitis, and it may trigger allergic reactions in some people. The fungus can also damage the building materials of a home, including drywall, carpeting and insulation.

The most effective way to remove mold is to dry out the area and prevent future growth. This can be done by allowing natural ventilation, or using a dehumidifier to remove moisture in the air. If a room has been infested with mold for more than 48 hours, professional intervention should be considered.

Depending on the type of mold that has infested a space, there are different cleaning methods recommended. For example, the CDC recommends using a damp sponge or cloth to wipe down non-porous surfaces like countertops and cabinets. A stiff scrub brush can be used on harder surfaces, and it is important to wipe the surface thoroughly and then let it dry completely.

For porous and absorbent materials, such as drywall or insulation, a more rigorous cleaning may be needed. Mold remediation experts can use a variety of specialized equipment and cleaning products to kill the fungus, and they may disinfect the area to ensure that all spores have been removed.

For walls, you should protect yourself with rubber gloves, a face mask and eye protection. It is also best to work in a well-ventilated area. Once you have your protective gear on, spray the moldy areas with vinegar and leave it to sit for at least 30 minutes before scrubbing it with a brush and then rinsing it with water. You can also use borax as an alternative to vinegar, but it is less potent and needs to be rinsed thoroughly.


Moisture is one of the key ingredients to mold growth. Whether it is from water damage, rain or flooding, a wet basement or even a spill on the carpet, it is important to address the problem right away to prevent mold and mildew from developing.

Mold is a fungus and thrives in damp conditions. It spreads through spores that are airborne and can cause health problems, especially in people with allergies or who have preexisting respiratory conditions. Mold spores can also trigger sinusitis, a condition that affects the sinuses and leads to irritation, pain, and inflammation of the mucus membranes. Mold exposure may also lead to hypersensitivity pneumonitis, a lung infection that can be fatal in children and adults.

A few simple steps can help you prevent mold from taking hold. Dry wet areas immediately, and keep them dry. Remove porous materials that cannot be thoroughly cleaned and dried, including carpeting and carpet padding, wallpaper, drywall, floor and ceiling tiles, insulation material, some clothing, leather, paper, wood, and food. Clean wet items with detergent and water. Temporarily store damaged items outside the home or building until insurance claims can be filed.

Maintain proper ventilation, especially in high moisture areas like the kitchen and bathroom. Ventilate appliances that produce a lot of moisture, such as dryers and stoves, to the outdoors. Keep humidity levels below 60 percent.

Ensure that your gutters and downspouts are in good working order, to keep the rainwater flowing away from the building. Check the ground frequently for accumulated water that can seep into the foundation or basement.

Keep an eye out for leaks and other potential problems with your roof, siding, windows, doors, and foundation. These are some of the most common areas where water damage and mold occur, and can be easy to miss.

Clean surfaces that are prone to mold, such as drywall and hardwood floors, regularly with an antifungal cleaner. To sanitize hard surfaces, use a mixture of 1.5 cups of fresh chlorine bleach to 1 gallon of water. Be sure to wear a face mask and gloves when using cleaning chemicals.