Tools For the Handyman

Handyman Naperville IL works in residential or commercial settings to perform repairs and maintenance. This includes painting, flooring, furniture assembly, and other tasks.

Local hardware stores often serve as a referral source for high-quality Handymen. Some states require handypersons to be licensed or insured. Some specialize in a particular area of work, while others can handle multiple areas.

A handyman needs various tools to complete multiple tasks, but one of the most important is fish tape. This tool allows a handyperson to run wires or cables through walls and tight spaces. This is a common task when installing lighting, doorbells and other electrical fixtures. There are different types of fish tape available, but the best choice depends on the job and the user’s experience level. Steel fish tapes are strong and work well for long, straight runs, while fiberglass fish tapes are flexible and can navigate tight bends or insulated walls.

Another type of fish tape is magnetic, which uses a magnet to guide the wire or cable through walls. This is a useful tool for electricians because it can help them avoid damaging existing wiring or pushing through walls too fast. Another option is a power fish tape, which can feed and retract lines two to three times faster than manual models.

The best fish tape for a particular project depends on several factors, including length, flexibility and durability. It’s also important to consider whether you’re running a wire through new construction or an existing home. If you’re working in an older building, nonconductive fish tapes may be necessary to avoid shocking existing conductors.

A quality fish tape should have clear, accurate measurement markings, be durable and easy to handle. Many newer models feature an ergonomic design with overmolded hand grips and high-durability plastics to reduce fatigue. They also have rapid payout and rewind mechanisms to speed up movement of the tape.

When using a fish tape, it’s a good idea to plan out how far you’ll be pulling the tape before starting. This will ensure that you don’t run out of tape before reaching your destination. You can also use a piece of electrical tape to mark the spot where you’ll need to stop.

It’s also helpful to make sure the end of your fish tape is properly secured. The sharp edge can be dangerous to your eyes, so take the time to bend it over with pliers and crimp it down tightly. This will prevent the tape from becoming tangled up in existing wiring or becoming lost while you’re working. You can also use a wire-pulling lubricant to reduce friction and make the process easier.

Electrical Tape

Electrical tape is a specialized type of self-adhesive tape that’s designed to insulate wires and materials that conduct electricity. It typically has a PVC backing and a non-corrosive rubber-based adhesive that can provide a long-term hold on wires and other materials. The backing is also designed to be stretchy so that the tape can conform to wires and other types of materials. Electrical tapes come in a wide range of colors and features that help them to meet different needs for specific applications. Backing construction, thickness, and dielectric strength are a few of the features that help to differentiate one type of electrical tape from another.

It’s important for handymen to choose the right electrical tape for their projects. Regular general-purpose tape may melt or ignite when it comes in contact with electricity, so specialized electrical tape is needed for safe and effective wiring applications. When selecting electrical tape, handymen should always check for UL (Underwriters Laboratories) approval. This helps to ensure that the tape meets national safety standards and will be durable for a long time.

In addition to checking for UL approval, it’s important for handymen to select the correct electrical tape for their job. They should consider factors like temperature ratings and if the tape is able to withstand exposure to moisture or harsh environments. They should also check for tensile strength and if it has good adhesion to itself and the material that it’s being used on.

Finally, handymen should always make sure that their area is free of electricity before applying electrical tape. Many accidents happen when people try to bind wires while the power is still running. By turning off the power at the circuit breaker box and double-checking the voltage status with a tester, handymen can ensure their safety while working with electricity. Duct tape should never be used to bind wires, as it lacks the necessary flexibility and insulating properties that electrical tape has.

Circular Saw

A circular saw can be a handyman’s best friend for woodworking projects, as it allows you to make smooth, accurate cuts in a wide range of materials. It’s especially useful for larger jobs where you may need to cut lumber for a frame or deck, as well as cutting plywood sheets to size.

When using a circular saw, it’s important to take precautions and follow best practices to ensure your safety and prevent injury. Using proper technique will also help you achieve more precise cuts and better results.

Start by ensuring the saw is properly set up. Place the workpiece on a stable surface and secure it with clamps or sawhorses to prevent movement during the cut. Position the saw on the material and align it with the mark or template you are following to guide the blade. Apply gentle pressure on the saw and guide it through the workpiece, avoiding quick movements or excessive force.

Once the saw is in position, activate the power switch or trigger to turn on the blade. Hold the large handle with your dominant hand and use your other hand to control the trigger. If the saw comes with a second handle, place it in your non-dominant hand to control the blade while you’re cutting. A safety or trigger lock switch is typically located on the handle and will prevent the blade from turning on if the trigger is not being squeezed.

Circular saws can be used to make a variety of cuts, but they’re most effective for straight rip and bevel cuts. When making these types of cuts, it’s important to adjust the blade depth so that it reaches just above the bottom of your material. You can also adjust the angle of your cut by loosening the bevel adjustment lever or knob and tilting the base plate in a desired direction.

To keep your circular saw in good condition, it’s recommended to clean the saw regularly. This will remove dirt, debris, and sawdust from the blade, blade guard, motor, and other moving parts. It’s also important to lubricate the depth adjustment mechanism periodically to maintain smooth operation.


A drill is an electrical power tool used for boring holes in wood, metal, stone, teeth, and other materials. It consists of a body with a motor, a chuck on the front that holds the drill bit and a trigger on the back to start and stop the motor. The drill can also have a handle to hold it by hand, which is useful for smaller projects.

The occasional handyman may use a drill to do basic repairs around the house, but it’s also useful for larger projects like installing a deck or an entertainment center. A good quality drill should be able to bore through concrete, steel, and other hard materials. It should also have variable speed and torque settings. For large projects, a corded or cordless drill with multiple attachments is recommended.

A power drill is an inexpensive and useful tool for a DIYer, but it’s not suitable for all types of tasks. Some jobs require a high amount of force, such as driving screws into dense materials. To do these jobs, a heavy-duty drill is necessary. These tools typically have more torque and a higher power output than smaller drills.

Drill rap is a lyrical subgenre of hip hop that is popular among youths in the United States. It is often associated with street culture and gangs, and it features lyrics that reference drugs, guns, and violence. As a result, the music has been criticized for fueling violence in London and other parts of the world. In 2018, a police commissioner blamed the genre for a rise in knife and gun crimes among young people, and she asked YouTube to remove videos that glamorize violence.

Despite its critics, drill rap is popular with many young people. It has influenced the musical styles of other genres, including trap and gangsta rap. It has also helped popularize rappers like Chief Keef, who rose to prominence after appearing on Kanye West’s “Yeezus” album in 2014. It has become a part of mainstream music, and many artists have adopted its sound and style.